A304005 Amana Carbide Tipped Brad Point Boring Bit 5mm L/H 70mm Long A304005 Amana Carbide Tipped Brad Point Boring Bit 5mm L/H 70mm Long

$26.63
SKU: A304005
Bit
Description Description

Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life.

Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.

Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

    Cut Diameter: 5mm

    Shank: 10mm

    Cut Length: 35mm

    Overall Length: 70mm

    Rotation: Left Hand

      Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life.

      Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.

      Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

        Cut Diameter: 5mm

        Shank: 10mm

        Cut Length: 35mm

        Overall Length: 70mm

        Rotation: Left Hand

          Shipping & Returns Shipping & Returns